Square 0.8KW/800W CNC Air-cooled Spindle Motor ER11 24000rpm 220V/AC 6.5A 400Hz Engraving Router Milling Grinding Cutting Machines 【 Suitable For Medium Or Large Processing 】
Square 0.8KW/800W CNC Air-cooled Spindle Motor ER11 24000rpm 220V/AC 6.5A 400Hz Engraving Router Milling Grinding Cutting Machines 【 Suitable For Medium Or Large Processing 】 by RATTMMOTOR at United Benton Humphreys. MPN: 70x94-0.8. Hurry! Limited time offer. Offer valid only while supplies last. Package include: 1 x 0.8KW ER11 Air cooled spindle motor (220V 400Hz 6.5A 24000rpm) Specification:Material: Stainless SteelSize: 70x94x222mmPower:
Product Description & Reviews
1 x 0.8KW ER11 Air cooled spindle motor (220V 400Hz 6.5A 24000rpm)
Material: Stainless Steel
Power: 0.8Kw 800W
Runout off: Less than 0.05mm
Precision tapered bore: Less than 0.025mm
Bearing Lubrication: Grease
Collet size: ER11
Bearings: 4pcs Germany Bearings (C7002x4),P4 class
Power supply interface:Professional aviation Interface, Interface 1234 marked 123 respectively connected to the inverter output end of the (U, V, W), 4 ground wire this interface must be safe ground.
Wood, Aluminum, Stone, metal, glass, PVC industry
Features & Highlights
- 4pcs Bearings from Germany High Quality Bearings
- Runout off Less than 0.05mm
- Size 70x94x222mm
- Applied to Lathes, Mills,Car Hoists, Pumps & Conveyors, etc
- Collet: ER11 collet
8.74 x 3.7 x 2.76 inches
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by RATTMMOTOR, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By Balance World Inc
mpn: -, ean: 9320689515734,
Material: plastic+metal+brass Length: approx. 36.5cm Hose: approx. 1.5m Color: as picture shows Fit for 8mm air pipe Cooling stone/metal/ceramic tile engraving machine. For CNC Lathe Milling Drill Machine. Engraving machine spray cooling, special des...
By Edge Technology
mpn: 06-000, ean: 0738435265861,
With the Mill Caddy from Edge Technology you can now hang your vise handle, dead blow hammer and air line from the front of the milling machine table. The Mill Caddy allows for a less cluttered work area by placing your most frequently used tools out...
mpn: MF125, ean: 0611801776966,
Material:plastic+metal Size:whole length:35cm Cardan Joint diameter:5mm Advantage:Cutting,drilling,tapping,cooling and lubricate. Can save the cooling liquid in the range of 80%,high quality in cooling effect. Notice: Must use the clean liquid. Do no...
mpn: 26-40000-104-FBA, ean: 0622430307025,
Specification Collet: 3.175mm Operating voltage 12-48VDC Power: 400W Speed :3000-12000r / min. (12V-3000 transfer, 24V-6000 transfer, 36V-9000 transfer, 48V-12000 rpm) Torque: 500mN.m Insulation resistance:> 2 megohm Dielectric strength: 400V Diamet...